HiKOKI DH36DPB/J3Z 36V Multi-Volt Cordless SDS-Plus Hammer Drill Brushless (With Dust Extraction) – Bare Unit

HiKOKI DH36DPB/J3Z MultiVolt Cordless Rotary Hammer Drill 18-36V – Bare Unit (With Dust Collector)

The HiKOKI DH36DPA/JKZ MultiVolt Cordless Rotary Hammer Drill Incorporates variable voltage output from the same 5Ah Battery. Meaning that the user can run their Rotary Hammer Drill on either 18V or 36V depending on its application.

With reactive force control function. Reactive force control (RFC) – When a sudden load is applied to the tip, the slip clutch is activated, or the controller built in the tool body stops the motor and alleviates the phenomenon that the tool body is swung.

Three modes can be switched depending on the application. It can be switched to “rotation” “rotation + blow” “blow” according to the application, by the large change lever next to the main body.

Features:

• High-performance HEPA filter
• With drilling depth adjustment function
• Removable dust box
• Adopted brush type sealing cap
• Delay Stop Function – The Motor inside the Dust collector will continue to work for a few seconds after the drill is switched off to collect any remaining dust.

Specifications:

 Drilling capabilities –

• Concrete – 3.4 to 28mm
• Wood – 32mm
• Metal – 13mm
• Corebit – 25 to 50mm
• Diamond Core Bit – 65mm

Product Dimensions (With Battery and dust collector installed) – 493 × 314 × 90mm

Product Weight (With battery and dust collector Installed) – 5.7KG

No Load Rotational Speed – 0-1000 Per Min

Kit Includes:

• Hitachi DH36DPA Cordless Rotary Hammer Drill Bare Unit
• Dust Collector